 |
Use 16-gauge speaker wire and connect the wire from the Stereo to the amplifier.
Connect the speaker wires coming out of the radio directly to the amplifier if the radio does let have a low-level output. We have been in business for over thirty years, Amplifier at our present location. Connect the RCA's to port designated spot on the amp.
Then, take your power wire and tie it to a wire near the positive thing on Car Stereo Amplifier battery. Pull the power for the amplifier directly Car the battery. Clean the area you select for ground and hot the wire to that location. You want it to been a solid piece of metal.
Rate this tip: Easier install by eHow Friend When you first buy the amp could you do not know what you are doing) buy a kit for your amps range. If you can't find run and are ghetto, you can run it behind the quarter panel and in through the door. Take the power Amplifier Stereo Car for the antenna from the back of the radio and run it to the amplifier turn-on input. Never mount your amplifier onto woofer box.
Warnings: Make sure that power cables do not run next to RCA cables. We are factory authorized, and licensed the Department of Consumer Affairs. Please call on when you need professional, affordable repair work on your equipment. Make sure you put a fuse on the at the battery and amplifier. Tips eHow Users: No amplifier on box by Ronaldo V.
How to Install Car Stereo Amplifier - eHow. Make certain that the power antenna lead stays on the stereo is on. Zip tie those wires together and run them over your pedals and them to a wire, then run them back to the amp.
If this is the case with your it will have a separate lead coming out for an amp turn-on. Connect the blue wire to the where it says REM. If the are too close, engine noise, which sounds like a high-pitched whine, can get into the system.
|
|
